Griffith's Gnat

The Griffith’s Gnat is a classic dry fly that imitates midges or midge clusters riding on the surface. It is extremely effective year-round, including in winter, and is a simple four-material pattern that makes an excellent beginner dry fly. Tied with peacock herl for the body and grizzly hackle palmered over it, it floats well and is easy to see.

No photos of this fly yet

Tied the Griffith's Gnat? Be the first to share a photo — it'll be featured right here.

Add Your Photo

Recipe

This page contains affiliate links. If you purchase through them, we may earn a small commission at no extra cost to you.

Tying Instructions

  1. 1

    Secure the size 16 dry fly hook in the vise and attach the black thread with a jam knot, then snip off the tag end.

  2. 2

    Lay down a solid even thread base back to about even with the barb, leaving space near the eye for the head.

  3. 3

    Select a long fluffy peacock herl, tie in the brittle green side, and pop off the tip.

  4. 4

    Select a grizzly dry fly hackle matched to the hook size so the fibers are even with or slightly longer than the hook point, prep it by trimming fibers shorter on one side, and tie it in dull side down at the end of the thread base.

  5. 5

    Wrap the peacock herl tightly forward by hand to the front of the thread base, secure it with thread, and snip the excess.

  6. 6

    Secure the thread with a half hitch if using a rotary vise, then wrap the hackle forward over the herl to the same point, secure it, and snip the excess.

  7. 7

    Brush the hackle fibers back, build a small neat head with flat wraps to keep the eye clear, whip finish, and trim the thread.