Zebra Midge
The Zebra Midge is a simple, highly effective bead-head midge imitation tied with black thread and a silver wire rib on a short-shank emerger hook. It is most commonly tied in sizes 16–22 and works across a wide range of fishing situations for trout, with the black-and-silver version remaining the most popular year after year. Color variations in bead, thread, and wire are easy to make.
No photos of this fly yet
Tied the Zebra Midge? Be the first to share a photo — it'll be featured right here.
Recipe
-
Hook · 2X-short emerger hook (Daiichi 1130 or similar), sizes 16-22
-
Bead · Silver 1/16 inch
-
Thread · Black UTC 70 denier or 8/0
-
Rib · Silver Ultra Wire small
-
Body · Black tying thread
Tying Instructions
-
1
Slide a 1/16-inch silver bead onto the hook with the small hole toward the eye.
-
2
Start the black thread just behind the bead, take a few wraps, and cut the tag.
-
3
Insert the end of the small silver Ultra Wire just behind the bead, then wrap the thread rearward about one-third of the body length, reverse direction, and repeat the process to build a tapered underbody before returning the thread to the bead.
-
4
Spin the bobbin counterclockwise to flatten the thread and wrap it rearward over the underbody to create a smooth tapered body, re-flattening the thread as needed.
-
5
Spin the bobbin clockwise to retwist the thread, then make evenly spaced open spiral wraps of the wire up the body to the bead.
-
6
Secure the wire with tight wraps in front of and behind it, helicopter the wire to break it off cleanly, build a small thread collar behind the bead, whip finish, and trim the thread.