Skykomish Sunrise
The Skykomish Sunrise is a classic steelhead fly created in the late 1930s by Ken and George McLeod. On a January morning in 1936 while driving to the Skykomish River, Ken asked his son George to tie a fly using the colors of the sunrise over the Cascades—red, yellow, and white. George tied red and yellow hackle, a red body, and a white wing; the fly took three steelhead, including a 17-pounder, from a single pool near Monroe and quickly became a sensation. Trey Combs rated it among the most important steelhead flies of the century. Modern versions commonly use red chenille for the body and calf tail, bucktail, or arctic fox in place of the original polar bear wing.
No photos of this fly yet
Tied the Skykomish Sunrise? Be the first to share a photo — it'll be featured right here.
Recipe
This page contains affiliate links. If you purchase through them, we may earn a small commission at no extra cost to you.
-
Hook · Ahrex NS115 Deep Streamer size 2 (heavy wire wet fly hook)
-
Thread · Black
-
Tag · Flat mylar tinsel medium silver
-
Tail · Red and yellow hackle fibres
-
Rib · Medium oval tinsel silver
-
Body · Red chenille
-
Hackle · Yellow and red schlappen wound together
-
Wing · White calf tail (or bucktail or arctic fox)
Tying Instructions
-
1
Attach the black thread and cover the shank, taking it a little way down the bend to form a base for the tag.
-
2
Tie in a short tag of flat silver mylar tinsel.
-
3
Prepare and tie in mixed red and yellow soft hen hackle fibres for the tail, leaving the butts pointing forward to help smooth the body.
-
4
Tie in the medium silver oval tinsel rib with the tag end pointing forward, then prepare and tie in the red chenille after stripping a short section of the core bare.
-
5
Wrap the thread forward to cover the butts, then wrap the red chenille forward to form a full body.
-
6
Wind the silver oval tinsel rib forward in even turns, adjusting any uneven wraps with your fingernails if needed, and secure it.
-
7
Tie in yellow and red schlappen hackle by the tips and wind them together to form a bushy collar, then pull the fibres down on both sides to leave room for the wing.
-
8
Select a bunch of white calf tail, remove short and loose fibres to preserve the natural taper, apply a bit of varnish to the butts, and tie the wing in on top.
-
9
Whip finish and optionally coat the head with UV resin or several coats of varnish for a neat finish.