Sculpin
This sculpin is a simple streamer pattern tied with a barred olive rabbit strip for both the tail and body, grey partridge for the fins, and a Fish Skull olive sculpin helmet for the weighted head. The helmet adds weight in the correct position so the fly rides properly, and the overall construction produces a realistic sculpin profile that draws aggressive strikes from trout and other predators.
No photos of this fly yet
Tied the Sculpin? Be the first to share a photo — it'll be featured right here.
Recipe
This page contains affiliate links. If you purchase through them, we may earn a small commission at no extra cost to you.
-
Hook · Tiemco TMC 811S size 6
-
Thread · Uni 6/0 olive (or 8/0)
-
Tail · Barred olive rabbit strip
-
Body · Wound barred olive rabbit strip
-
Fins · Dyed olive grey partridge
-
Head · Fish Skull olive sculpin helmet
-
Eyes · Small eyes included with helmet
-
Optional weight · Lead tape or foil on underside
-
Adhesive · Super glue, UV resin, varnish
Tying Instructions
-
1
Secure the TMC 811S size 6 hook in the vise and start olive Uni thread, running it down to a point even with the hook point.
-
2
Measure and tie in a barred olive rabbit strip as a tail about twice the length of the hook, skin side down, and trim the excess.
-
3
Optionally add lead tape or foil to the underside of the shank for weight and secure it.
-
4
Moisten the same barred olive rabbit strip, taper the end, and wind it forward as the body while stroking the fibers back, applying super glue under the wraps for durability.
-
5
Trim the rabbit neatly at the front with a blade, secure it, and use a permanent marker to add barring that continues from the tail.
-
6
Brush the body with a dubbing brush to fluff the fibers.
-
7
Select two dyed olive grey partridge feathers, match the tips, and tie them in one on each side as pectoral fins about half the body length, positioning them so they splay outward.
-
8
Whip finish, apply super glue around the head area, and firmly press on the olive Fish Skull sculpin helmet so the eyes sit on the sides.
-
9
Attach the small eyes that come with the helmet, coat them and the head with UV resin, cure, and finish with a coat of varnish.
-
10
Optionally trim the underside of the body lightly to show more skin and create a lighter belly.